Designed for extraction of clear filtrate (not the filtrand) X10 DURAN Micro Immersion filter f. reverse filtration, 10 mm, porosity 3

Stainless steel filter funnel three-place manifold, for microbiology monitors and analytical funnels SS VACUUMMANI 3-PLACE

Designed for particle and cell removal, this filter can be used for clarification purposes. X12 Sartolab BT Vacuum Filter, 0.45 µm Cellulose Acetate, 500 ml

Made from borosilicate glass with stainless steel support screen MB FILT HOLDER 25ML S/S SUPP 25MM

Robu™ Guko Rubber Gasket is a conical gasket suitable for use with filter funnels. GUKO Rubber gasket for Funnels 85 mm, conical

Duran™ glass filter for filtration both during analytical as well as preparative work. X5 DURAN Filter discs, POR.2, D. 50 mm

Designed for use with Duran™ filtration apparatus. X10 DURAN Micro filter candle without tube, 13x21mm, porosity 3

General microbiological analysis EZFIT MANIFOLD 1 PLACE FOR MICROFIL V OR MICROFILS

Designed for use with Duran™ Filtering Apparatus X10 DURAN Allihn filter tube, 30ML, porosity 3

Accommodates the use of 2mL deep well collection plates with MultiScreen™ Deep Well Solvinert™ filter plates. Deep Well Collar for MultiScreen™_HTS Vacuum Manifold can be used for both filtrate collection (DirectStack™ mode) and filter-to-waste applications. Deepwell Collar for MultiScreen HTS

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe X10 SILICONE O-RING 5-329

For use with Sterility testing System X100 Glass Cylinder For SM 16523

Funnel dispenser for secure removal of single, sterile Microsart @filter MICROSART 100ML FUNNEL DISPENSER

For vacuum filtration using 96- and 384-well MultiScreen_HTS, MultiScreen™ Solvinert, and Solvinert Deep Well filter plates MultiScreen HTS Vacuum Manifold

Provide vacuum support for simultaneous filtration of either three or six test samples 3-place manifold, 47 mm, stainless steel

For filtration of gases or liquids at inlet pressures of 20 to 700 bar REPLACEMENT PARTS KIT FOR HIGH PRESSURE SS FILTERHOLDER, 47MM

Used for general filtration applications and filtration of samples for particulate or biological contamination analysis STERIFIL FUNNEL, 250ML, 47MM

For use with Sterility testing System X10 Polypropylene Plug

Accessories for filter holders for sample preparation. Fritted Glass Base W/Stopper, 25mm

Duran™ glass filter for filtration both during analytical as well as preparative work. X10 DURAN Filter discs, POR.5, D. 30 mm

Accessories for filter holders for sample preparation. X12 1225 MANIFOLD SMPLE CUP EXTENSION BARREL

Includes 300mL funnel, fritted base and cap, clamp, and alignment sleeve. Glass Vacuum Filter Holders, 47mm are used in vacuum filtration of liquids to produce clarified or particulate-free filtrate or to analyze particulate or biological contamination retained on the filter surface. Glass filter holder assembly, stainless steel screen, with 300 mL funnel, base, stopper, clamp, alig

Replacement parts for MultiScreen_HTS Vacuum Manifold HTS Manifold Gauge Assembly

Recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate GLASS FILTRATION UNIT

Replacement part for models XX1014700 / XX1014730 / XX1514700 vacuum filter assemblies. Merck™ Funnel, 300mL for 47mm Glass Vacuum Filter Holders is a graduated funnel made of autoclavable borosilicate glass. Glass funnel, borosilcate, 300ML

Ultraclean or sterilize liquids or gases by pressure filtration PTFE O-RING 2-251 142MM

Accessory for use with Dispensing Pressure Vessels PVC TUBING, 1/2'' ID 10FT W/CLAMPS 125PSI

Sartorius Stedim Biotech™ Glass Tube for Perforated Silicone Stopper 75D is an integral part of a vacuum flask assembly. Glass tube for stopper of 16672-----1

Designed for use with Duran™ Filtering Apparatus X10 DURAN Filter discs, POR.3, D. 10 mm

For use with Sterility testing System SILICONE SEALING RING 36/47MM