Increase lab versatility Fisherbrand Four block dry bath: digital control,4LED, Easy timer, 200-240V

A variety of blocks for any application Fisherbrand Flat bottom, 15 x 15ml block

Use these blocks for a variety of applications. Stuart™ Anodized Aluminum Blocks may be used in any combination. BLOCK, 28MM HOLES

Uses up to 30% lower energy consumption compared to the previous model. Binder™ KB Series Cooling Incubator with Compressor Technology provides safe, reproducible results even at high ambient temperatures. KB240-230V, Standard, cooling incubators with compressor technology, 247 L, 200

Increase lab versatility with the Thermo Scientific™ digital dry baths/block heaters. Dry Bath standard 1 block 200-240V

Culture large volumes of patient samples for bacterial growth, perform short-term growth studies and work with large volume products with this incubator. INCUBATOR FORMA REACH-IN CO2high capacity stainless steel 821.2L 230V 50-60Hz

Includes applications requiring temperatures of up to +80°C, including critical incubations at +37 °C. Memmert™ Natural Convection Incubator with Single Display and Touchscreen ensures that key temperature overshoots are completely eliminated and that valuable loads are warmed up accurately. Incubator IN450 SingleDISPLAY, 449L, 20-80°C, Natural Convection

Improve your assay results by dry incubation and mixing of your samples simultaneously with this mixer. The Eppendorf ThermoMixer™ C is ideal for heating, cooling and mixing almost any of your lab vessels. ThermoMixer C w/o thermoblock, 220-240V EU plug

Preserve floor space with stackable Thermo Scientific™ Forma™ 310 Direct-Heat CO₂ Incubators, which combine high capacity and an easy-to-use design. ETUVE CO2 JAQ.AIR CAPTEUR IR CUIVR

Increase efficiency, enable portability 4-20MA DATA OUTPUT FOR STERICULT

Maximize bench space with our compact, lightweight dry bath with multiple combinations of block sizes for versatility. Compact Dry Bath 2 block 200-240V

BINDER™ Right Access Port is an accessory for use on the right of a variety of chambers and incubators. Access port with silicone plug - 30 mm, right

Achieve your next breakthrough. This CO₂ incubator delivers the performance reliability, ease of operation, and value required to support a range of culturing needs. Forma Steri-cycle i160 CO2 incubator dual chamber

Precisely control the CO₂ and temperature with Thermo Scientific™ Forma™ Series II 3110 Water-Jacketed CO₂ Incubators. X1 Incubator, water jacketed CO2, Forma Series IIwith humidity control

Increase lab versatility with the Thermo Scientific™ Digital Heating Shaking Drybath, which can be used as a drybath, shaker or both. SHAKE/HEAT DRYBTH230V/INTL PLG

Save space with the Thermo Scientific™ Heratherm™ Compact Microbiological Incubator. Incubator compact mechanical IMC18 18L 50°C

Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates. Stuart™ Block Heaters maintain temperature uniformity via sensitive electronic controls. Heats to 100°C in less than 12 minutes. DRY BATH 130°C DIGITAL 2 BLOCKS

Safe, reproducible incubation possible, even at high ambient temperatures. KT115-230V, Standard, Series KT - Cooling incubators with thermoelectric cooling, 102 L, 200

BINDER™ Series C CO₂ Incubator is free from contamination due to hot-air sterilization and reliable pH stability. C170-230V-R, Door hinged right, Series C - CO

Get maximum flexibility for your Dry Baths/Block Heaters with a variety of accessories for any application. 8 x 20mm dia block

Offers precise temperature control, increased energy efficiency, and ease of usability. Equipped with Peltier technology to reach and maintain the precise ambient temperatures you need for reliable results. Heratherm IMP 180 with socket and CEE-7/7-plug 230V, 50 Hz

Use Thermo Scientific Accessories for Digital Shaking Baths to optimize flexibility and performance. SHAKE/HEAT BLOCK 96 WELL

Maintain accurate uniform temperatures with these thermoblocks. Eppendorf™ Smartblock™ Thermoblocks are compatible with Eppendorf ThermoMixer™ C, and support a broad range of applications. SmartBlock PCR 96 w/lid

A variety of blocks for any application Fisherbrand Mixed block 32 x 6mm dia + 21 x 10mm dia

Minimize the need to frequently change out cylinders and reduce the risk of running out of gas. These gas guards are factory installed and built in to specified CO₂ incubators. N2 BUILT-IN GAZ GUARD

BINDER™ Left Access Port is an accessory for use on the left of a variety of chambers and incubators. Access port with silicone plug - 30 mm, left

Precisely control the CO2 and temperature with Thermo Scientific™ Forma™ Series CO2 Incubators.  Forma™ CO₂ Incubator Accessories are important components for optimal operation. HUMIDITY (RH) / ALARM DISPLAY

Perform a range of general applications with these general protocol incubators. Incubator general gravity IGS750 750L 75°C

Provides powerful compressor cooling. Binder™ KB Series Cooling Incubator uses APT.line™ preheating chamber technology for safe and reproducible incubation conditions even at high environmental conditions. KB23-230V, Standard, Series KB - Cooling incubatorwith compressor technology, 20 L, 230 V

Carry out high-volume culturing with a high-level of contamination control with these stackable CO2 incubators, which feature microprocessor controls. 3307 Dolly 3307 Incubators gem.Angebot 30075117vom 14.01.2010