Component of DryEase™ Mini-Gel Drying System GEL-DRY SOLUTION (1X), 4X1LThe DryEase® Mini-Gel Drying System is a simple,

Allows the closest estimation of molecular weight of your sample protein over a wide molecular weight range 1 ML UNSTAINED PROTEIN STANDARD MARK12(TM) WIDE-RAnge for SDS-PAGE 1mL Store at 2-8C

Easily set up in just three simple steps XCELL4 SURELOCK MIDI-CELL APPA

Component of DryEase Mini-Gel Drying System Dryease precut cello 00The DryEase® Mini-Gel Drying System is a simple,

Performs Western blotting transfer simply, efficiently, and reliably, within seven minutes and without the need for liquid buffers IBLOT 2 GEL TRANSFER DEVICE

Quickly and easily run up to two Novex 8 x 8cm minigels, leak-free without any clamps or grease Surelock Xcell 00

Designed for analysis of high molecular weight proteins on NuPAGE™ Novex™ Tris-Acetate gels 250 UL PRE-STAINED PROTEIN STANDARD 250µL STOREat -20°C

Ready-to-use protein standard designed for molecular weight estimation of proteins using native gel electrophoresis NATIVEMARK UNSTD PROTEIN STD

Mixture of 10 blue-, orange- and green-stained proteins (10 to 180kDa) used as size standards in protein electrophoresis (SDS-PAGE) and Western blotting. X10 PageRuler(TM) Prestained Protein

Allows you to easily visualize protein molecular weight ranges during electrophoresis and quickly evaluate Western transfer efficiency 500 UL PRE-STAINED PROTEIN STANDARD COLOUREDstandard for SDS-PAGESeeBlue(r) Plus2 500µL store

Mixture of 9 blue-, orange- and green-stained proteins (10 to 250kDa) used as size standards in protein electrophoresis (SDS-PAGE) and Western blotting. X10 PageRuler(TM) Plus Prestained Protei

Five times more sensitivity than Coomassie™ R-250— and can detect as little as 10ng of BSA COLLOIDAL BLUE STAINING KITThe Colloidal Blue Staining Kit allows detection

Consumable stacks with integrated PVDF transfer membranes for dry blotting of proteins X10 iBlot 2 Transfer Stacks, PVDF, mini

For pouring gels X25 Cassette disposable sealed on three sides to

A 40% (w/v) solution of Ultra Pure Acrylamide (38.96%) and bis-Acrylamide (1.04%) in specially-prepared deionized water. Final ratio is 37.5:1 500ML LIQUI-GEL 37.5:1

X4 ACRYLAMIDE/BIS SOLUTION, 37.5:

Separation Range: 40 to 500 kDa (TA Buffer); Separation Type: Denaturing (Tris-Acetate Running Buffer), Native (Tris-Glycine Running Buffer); For Use With: Mini Gel Tank, XCell SureLock Mini X10 Tris-acetate gel Invitrogen(tm) NuPAGE(r)

Designed for accurate, easy, and convenient molecular weight estimation of a wide range of molecular weight proteins during SDS-PAGE and Western blotting SHARP PRE-STAINED PROTEIN STANDARD. THE SHARPEST,Most Accurate Pre-stained MW Standard for Protein

Separation Range: 15 kDa to 260 kDa (MOPS Buffer), 3.5 kDa to 160 kDa (MES Buffer); Separation Type: Denaturing (MES Running Buffer, MOPS Buffer); For Use With: Mini Gel Tank, XCell SureLock Mini X10 Bis-tris gel Invitrogen(tm) NuPAGE(r) Novex(r)

Separation Range: 15 to 260 kDa (MOPS Buffer), 3.5 to 160 kDa (MES Buffer); Separation Type: Denaturing (MES Running Buffer, MOPS Buffer); For Use With: Mini Gel Tank, XCell SureLock Mini X10 Bolt 4-12 percent Bis-Tris Plus Gels, 10-well

Separation Range: 15 to 260 kDa (MOPS Buffer), 3.5 to 160 kDa (MES Buffer); Separation Type: Denaturing (MES Running Buffer, MOPS Buffer); For Use With: Mini Gel Tank, XCell SureLock Mini X10 Bolt 10 percent Bis-Tris Plus Gels, 10-well

Separation Range: 10 to 80 kDa (MOPS Buffer), 3.5 to 40 kDa (MES Buffer); Separation Type: Denaturing; For Use With: Mini Gel Tank, XCell SureLock Mini X10 Bis-tris gel Invitrogen(tm) NuPAGE(r) Novex(r)

A mixture of seven native proteins (14.4 to 116kDa) for use as size standards in protein electrophoresis (SDS-PAGE). X2 PageRuler(TM) Unstained Protein (2 x 250 uL)

Optimized for use with Bolt™ Bis-Tris Plus gels, and are available in a variety of formats X10 BOLT SAMPLE RED AGT

Fast, one-step staining protocol requiring no destaining X10 SYPRO(R) ORANGE PROTEIN GSYPRO Orange protein gel stain is a sensitive,

CAS: 9012-36-6 MDL Number: MFCD00081294 100GR Agarose low EEO, for electrophoresis, (Mr <= 0.10)

Optimized for use with Bolt™ Bis-Tris Plus gels, and are available in a variety of formats BOLT MOPS 20XRUN BUF

Optimized for use with Bolt™ Bis-Tris Plus gels, and are available in a variety of formats 500 ML BOLT MES SDS RUNNING BUFFR 20X

Achieve nanogram-level detection and results that exceed those of typical coomassie stains, all without a destaining step. GELCODE BLUE STAIN REAGENT, 500 ML

For use with DryEase™ Mini-Gel Drying System DRYEASE MINI GEL DRYER BASEThe DryEase® Mini-Gel Drying System is a simple,