Filter Holders and Hardware

R&L Enterprises™ Nickel Plated Brass Vacuum Pump

Evacuates a 1L system to 200mbar in 40 seconds (water supply at 170kPa, consumption 3.5L). R&L Enterprises™ Nickel Plated Brass Vacuum Pumps do not require a tail pipe. Filter pump nickel plated brass

Kimble™ KIMAX™ Graduated Filtering Flask with Side Tubulation

Designed for vacuum to 29° of mercury X18 Filtering Flasks, Heavy Wall, Side Tubulation,

Thermo Scientific™ Nalgene™ Vacuum Manifold

Widely spaced outlets permit easy funnel manipulation Filter Manifold Stopcock

Thermo Scientific™ Nalgene™ Vacuum Manifold

Allow for easy funnel manipulation with the widely spaced funnels of this vacuum manifold. This stable benchtop unit is made of high quality stainless steel. MANIFOLD VAKUM SS3 PLACEVABLE

Thermo Scientific™ Nalgene™ Polycarbonate Filling Bell

Transfer sterile media aseptically from large containers to small media bottles or culture vessels using the Thermo Scientifc™ Nalgene™ Polycarbonate Filling Bell. FILLING BELL PC

Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (90mm)

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter FUNNEL/SUPPORT ASSY 90MM

Thermo Scientific™ Nalgene™ Vacuum Gasket for Filter Funnels

Replace #7 or #8 stoppers in any manifold or filtering flask with the Thermo Scientific™ Nalgene™ Vacuum Gasket for Filter Funnels. X6 TPE REDUCER 28 - 40 MM

Thermo Scientific™ Nalgene™ Filter Funnel Adapter

Use this bulk-packed version of funnel adapters included with 145- and 147-series analytical test filter funnels in high throughput QC testing laboratories. X25 145 FUN ADP,BK

Kimble™ Kontes™ Ultra-Ware™ Solvent Filtration Solvent Pick-up Adapter

Converts Ultra-Ware filtration assemblies for inline filtration/degassing applications Pickup adapter Kimble solvent with 1/4 inch O.D.PTFE tubing

EMD Millipore Stainless-Steel Accessories

For filtration of gases or liquids at inlet pressures of 20 to 700 bar X5 PTFE-TREATED FLUOROELASTOMER INNER O-RING FOR HIGH PRESSURE SS FILTER HOLDER 47MM,

EMD Millipore Accessories for Dispensing Pressure Vessels

Accessory for use with Dispensing Pressure Vessels VENT/RELIEF VALVE, 7 BAR, ASME

Millipore™ EZ-Pak and Microfil System

For the ultimate in convenience and safety. Millipore™ EZ-Pak and Microfil System includes ready-to-use, sterile filtration funnels and a unique filtration support to facilitate sample processing.
X150 Microfil funnel + 0.45µm 47mm black gridded EZ-Pak membrane (ester cellulose)

EMD Millipore 47mm Hydrosol™ Stainless-Steel Vacuum Filter Holder

For particulate or biological contamination analysis via vacuum filtration HYDROSOL SS 47MM FILTER HOLDER

EMD Millipore EZ-Fit™ Vacuum Manifolds

General microbiological analysis EZFIT MANIFOLD 1 PLACE FOR MICROFIL V OR MICROFILS

EMD Millipore MultiScreen™HTS Vacuum Manifold Replacement Parts

Replacement parts for MultiScreenHTS Vacuum Manifold HTS Manifold On-OFF Valve Assembly

EMD Millipore ZHE Hazardous Waste Filtration System Replacement Parts and Accessories: 90mm Diameter

Designated by the US EPA as a suitable apparatus for Toxicity Characteristic Leaching Procedure (TCLP) ZHE TIGHT SYRINGE

EMD Millipore Dispensing Pressure Vessels

Holds liquid for filtration through pressure-operated filter holders, if connected to an external pressure source PRESSURE VESSEL 316SS 20LLiter

EMD Millipore 142mm Hazardous Waste Filter System Replacement Parts

Accessories for filter holders for sample preparation. UNDERDRAIN SCREEN TEF CTD

EMD Millipore 25mm Glass Microanalysis Vacuum Filter Accessories and Replacement Parts

Accessories for filter holders for sample preparation. FRITTED GLASS BASE W/STOPPER, 25MM

EMD Millipore Replacement Parts for Sterifil™ Aseptic System

Replacement parts for Sterifil aseptic system X100 STERIFIL GUM RUBBER CAPS

EMD Millipore Sterifil™ 47mm Aseptic Vacuum Filter System and Holder

Closed unit for particulate or biological contamination analysis PLASTIC FILTER HOLDER 47MM STERIFIL

EMD Millipore 142mm Hazardous Waste Pressure Filter System

Separates solid and liquid phases of waste samples HAZARDOUS WASTE FILTRATION SYSTEM 142MM

EMD Millipore 47mm Hydrosol™ Stainless-Steel Vacuum Filter Replacement Parts

Accessories for filter holders for sample preparation. HYDROSOL REPLACEMENT PARTS KIT

EMD Millipore Stainless-Steel Filter Holders

For filtration of gases or liquids at inlet pressures of 20 to 700 bar SS FILTER HOLDER, 47MM

EMD Millipore Replacement Parts for Stainless-Steel 13 and 25mm Filter Holders

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe SS PHOTOETCHED SCREEN

EMD Millipore 25mm Glass Microanalysis Vacuum Filter Holder and Support

Vacuum filter small volumes for particulate or biological contamination analysis GLASS FILTER HOLDER, 25MM, SS SUPPORT

EMD Millipore Microfil™ V Filtration Device

Faster and easier than conventional filter holders used to test drinking water X24 Microfil V unit +pre-assembled 0.45µm 47mm white gridded membrane (cellulose esters), sterile

EMD Millipore Stainless-Steel Pressure Filter Holders Replacement PTFE O-Rings

Ultraclean or sterilize liquids or gases by pressure filtration X4 PTFE O-RING 90MM

  spinner