Versatility at a lower cost than stainless-steel tanks. CYL. TANK W. SPIGOT HDPE 55 GAL

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. Lightweight Cylindrical LLDPE Tank with Cover andSpigot, 114L

Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W. COVER HDPE 15 GAL.

Versatility at a lower cost than stainless-steel tanks. TANK HDPE 170L

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. TANK,CYLINDRICAL,POLYPROPYLENE WITH COVER 300 X460MM DIAMETER X HT 28 LITRES (11200-0007)

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. TANK ZYLINDRISCH, 208L LLDPE MIT DECKEL, GRADUIERT

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 15 LITRES(2324-0015)

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. TANK RECTANGULAR WITH COVER POLYPROPYLENE 200 X200 X 200MM W X D X H 8 LITRES (14200-0002)

Molded glass tank lids for development of any size TLC plate up to 20 × 20cm DEVELOPING TANK WITH NONSLIP Lid 20 x 20cm orfour 5 x 20cm plates

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PP 20GAL.

Cylindrical glass tanks for the development of 1 x 3 in. to 10 x 20cm plates. TLC tank Kimble cylindrical glass for 1 x 3inch

Enhance mixing capabilities open-bag, flat-bottom Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners , which offer cost-effective, single-use fluid processing. X10 Tank Liner, 568L, 150Gal, 25kGyVE=10 Stück

Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates Kontes TLC Cylindrical Developing Tanks, Chromatog

4L DIP TANK YELLOW

Dip tank for cleaning parts and sub assemblies

2L BENCH CAN YELLOW

X48 industrial tanks HDPE 2 L GL45

X4 tanks HDPE with spigot 20 L

X24 industrial tanks HDPE 10 L GL51

19L DIP TANK YELLOW

X2 tap for tanks 1770 and 1771

BENCH CAN YELLOW (1L)

200L LDPE CONTAINER

RINSE TANK FLOOR STANDING, WITH FOOT TREADLEsteel yellow83L

Dip tank for cleaning parts and sub assemblies

X2 stackable tanks HDPE 560x330x255mm 46L

X2 stackable tanks HDPE 380x280x200mm 20L

Dip tank for cleaning parts and sub assemblies

Dip tank for cleaning parts and sub assemblies