Filter Holders and Hardware
Merck™ Sterifil™ 47mm Aseptic Vacuum Filter System and Holder
Closed unit for particulate or biological contamination analysis PLASTIC FILTER HOLDER 47MM STERIFIL
Merck™ Microfil™ Filtration System
Convenient filtration system uses presterilized funnels and membranes on lever-action filtration support Microfil funnel dispenser, stainless steel, for Microfil plastic funnel
MilliporeSigma™ Glass Vacuum Filter Holder, 47mm
Includes 300mL funnel, fritted base and cap, clamp, and alignment sleeve. Glass Vacuum Filter Holders, 47mm are used in vacuum filtration of liquids to produce clarified or particulate-free filtrate or to analyze particulate or biological contamination retained on the filter surface. Glass filter holder assembly
Thermo Scientific™ Nalgene™ Vacuum Manifold
Allow for easy funnel manipulation with the widely spaced funnels of this vacuum manifold. This stable benchtop unit is made of high quality stainless steel. MANIFOLD VAKUM SS3 PLACEVABLE
Merck™ Swinnex™ Filter Holders
Ultraclean or sterilize small volumes of liquids dispensed by syringe X10 SWINNEX 13MM FILTER HOLDERs
DWK Life Sciences Kimble™ Kontes™ Component Parts For 47mm Ultra-Ware™ Microfiltration Assembly
For ultra-ware microfiltration assembly with stainless steel support STAINLESS STEEL FRIT FOR 5292F
Millipore™ EZ-Pak and Microfil System
For the ultimate in convenience and safety. Millipore™ EZ-Pak and Microfil System includes ready-to-use, sterile filtration funnels and a unique filtration support to facilitate sample processing.
X150 Microfil funnel + 0.45µm 47mm black gridded EZ-Pak membrane (ester cellulose)
Merck™ Microfil™ Funnels
Available in different colors X150 Microfil 250ml funnel + 0.45µm 47mm black gridded EZ-Pak membrane (ester cellulose)
Merck™ Funnel, 300mL for 47mm Glass Vacuum Filter Holders
Replacement part for models XX1014700 / XX1014730 / XX1514700 vacuum filter assemblies. Merck™ Funnel, 300mL for 47mm Glass Vacuum Filter Holders is a graduated funnel made of autoclavable borosilicate glass. Glass funnel, borosilcate, 300ML
Merck™ Base and Stopper for 47mm Glass Vacuum Filter Holders
Replacement part for the XX1014700/XX5014700 vacuum filter assemblies. Merck™ Base and Stopper for 47mm Glass Vacuum Filter Holders is a borosilicate fritted-glass filter holder base with a silicone stopper that is used to connect the filter assembly to the filtering flask or manifold. Fritted Glass Base For 47mm Glass/Filter Holder With Stopper
Merck™ EZ-Fit™ Manifolds
General microbiological analysis EZFIT MANIFOLD 1 PLACE FOR RUBBER STOPPER TULIP
Merck™ EZ-Fit™ Manifold 6-Place for Rubber Stopper Tulip
For use in general microbiological analysis EZFIT MANIFOLD 6 PLACE FOR RUBBER STOPPER TULIP
GE Healthcare Whatman™ MicroPlus MBS I Membrane Filtration Accessory: Funnel
Accessories for microbiological control filtration system X20 MBS I FUNNEL OF PP 100 ML
DWK Life Sciences Wheaton™ Stainless Steel Support Screens
For vacuum filtration assembly. Wheaton™ Stainless Steel Support Screens are manufactured from the highest quality materials. 25 MM STAINLESS STEEL SUPPORT
Merck™ Millipore™ All-Glass Filter Holder Kit
Merck™ Millipore™ All-Glass Filter Holder Kit was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. All-Glass Filter Holder Assembly with 500 mL funnel, fritted base and cap, clamp, 1 L flask
Merck™ Sterile Absorbent Pads
Dispensing of sterile absorbent pads while reducing contamination risks X1000 10 canisters of 100 absorbent pads, sterile, 47mm, cellulose
Duran™ Micro Filter Candle With Narrow Tube
Designed for use with Duran™ filtration apparatus. X10 DURAN Micro filter candle with narrow tube, 125aD, porosity 2
Sartorius™ Stedim Stainless-steel Syringe Filter Holder
SS MB SUPPORT 47MMVentil, 47 mm
DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support (47mm)
Designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination GLASS FUNNEL SS FRIT 300ML
Merck™ Stainless-Steel Filter Holders
For filtration of gases or liquids at inlet pressures of 20 to 700 bar HIGH-PRESSURE SS FILTER HOLDER, 47MM
Merck™ 47mm All-Glass Vacuum Filter Holder Replacement Parts
Accessories for filter holders for sample preparation. X25 PTFE GASKET FOR HYDROSOL,
Cole-Parmer™ Advantec 301900 Pressure Filtration Holder
Process samples from an in-line system or pressure vessel with this stainless steel holder. Cole-Parmer™ Advantec 301900 Pressure Filtration Holders maximize flow rates by applying positive pressure to the fluid over a broad membrane surface. 304 SS FILTER SUPPORT 142MM
Merck™ Filter Holder Vacuum Manifolds
Provide vacuum support for simultaneous filtration of either three or six test samples 3-place manifold, 47 mm, stainless steel
Merck™ Microsyringe Filter Holder
Use to ultraclean or sterilize small volumes dispensed by syringe MICROSYRINGE SS FILTER HOLDER, 25MM, 1/4'' NPTF
Merck™ Sterifil™ 47mm Aseptic Vacuum Filter System Replacement Parts
Used for general filtration applications and filtration of samples for particulate or biological contamination analysis STERIFIL RECEIVER FLASK, 250ML
Merck™ Pressure Filter Holder
Made of stainless-steel SS PRESSURE FILTER HOLDER 47MM, 340ML
Merck™ Microfil™ V Filtration Device
Filter water and other beverages. Merck Millipore™ Microfil™ V Filtration Device is a sterile filter that can contain 100mL. X24 Microfil V unit +pre-assembled 0.22µm 47mm white gridded membrane (cellulose esters), sterile
Merck™ Stainless-Steel 13 and 25mm Filter Holders
Ultraclean or sterilize small volumes dispensed by syringe MICROSYRINGE SS FILTER HOLDER, 25MM
Merck™ Stainless-Steel Pressure Filter Holders
Ultraclean or sterilize liquids or gases by pressure filtration FILTER HOLDER 293MM 316SS