Fungicrom Separating Chambers (TLC) are to be used with thin layer chropatography. MULTIPLAK CHAMBER W/O LID

Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W. COVER HDPE 15 GAL.

Knob Lid for use with Fungicrom Separating Chambers (TLC). LID FOR TLC TANK 20X20CM

For use with Kontes™ rectangular developing tank (K416190-4900) ALUMINUM RACK FOR 14429

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 8 LITRES(2324-0008)

Nalgene Heavy-Duty Cylindrical LLDPE Tanks include a needle-type spigot installed for draw off. Spigot accepts 5/8 inch I.D. tubing. Tanks are offered in sizes from 19 to 208L.

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PPCO 30GASchraubverschluss

stackable tanks HDPE 380x280x200mm 20L

Versatility at a lower cost than stainless-steel tanks. RECTANGULAR TANK HDPE 2 GAL.

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. TANK CYLINDRICAL,POLYPROPYLENE WITH COVER 280 X380MM DIAMETER X HT 19 LITRES (11200-0005)

Molded glass tanks for development of any size TLC plate up to 20 × 20cm DEVELOPING TANK WITH NONSLIP Lid 20 x 20cm orfour 5 x 20cm plates

Develop multiple TLC plates simultaneously. TLC Simultaneous Developing Chambers  come with a choice of room for either 2 or 5 plates. TLC-Separation-Chamber for 2 simultaneous separations, 10 x 10 cm plates

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. TANK SPIGOT COVER 26L HDPE

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. Cylindrical Tank LLPDPE 28L (7.5GAL)

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. RECTANGULAR TANK W COV. PP 8GAL.

TANK TLC DEVELOPING 10X10

LOW PROFILE TANK, LDPE 45L

X1 Measuring cylind. (glass) 10mL

Kartell™ HDPE Industrial Tank is useful in everyday laboratory practice and features a comfortable handle with a secure seal-cap following DIN recommendations. X48 industrial tanks HDPE 2 L GL45

Designed to rationalize laboratory and small production line organization. Kartell™ Tank with Spigot gives the opportunity to optomize water, aqueous solutions and solvents availablity in a reduced space. X4 tanks HDPE with spigot 20 L

4L BENCH CAN W/O BSKT YELLO

Dip tank for cleaning parts and sub assemblieswith HDPE liner steel for chemical resistance

30 L THERMOS DILUTION WATER TANKmit Temperierschlange, 30 l

8L DIP TANK YELLOW

RINSE TANK FLOOR STANDING, WITH FOOT TREADLEsteel yellow83L

19L DIP TANK YELLOW

X2 Measuring Cylinders (glass) 2

X1 Development tanks

stackable tanks HDPE 560x330x255mm 46L

Constructed of high density polyethylene, making it good for packaging and transporting liquids in the food industry. Kartell™ Spigot for Tank facilitates easy use by allowing the tank to be in a position to stand. X2 tap for tanks 1770 and 1771