Contec™ PROSAT™ Sterile Low Endotoxin Wipes

Made from 100% knitted polyester Polynit Heatseal and presaturated with a blend of 70% IPA and the highest grade distilled Water for Injection (WFI). PROSAT™ Sterile Low Endotoxin Wipes are low in particles and fibers for ideal usage in product contact areas. Each batch of wipes has a guaranteed endotoxin level of less than <1EU per device.

Brand:  Contec™ PSWE0001-BPR

Product Code. 17254533

Description

• PROSAT™ Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI).
• Each lot is tested before release and low endotoxin certified to less than <1EU/wipe.
• The sealed edge wipe produces very low levels of particles and fibers and is ideal for use on product contact surfaces.
• Each resealable pouch contains a small number of wipes, eliminating any waste at the end of a session.
• Each pouch is individually bagged for easy entry into the sterile suite.
• Presaturated wipes provide many benefits including solvent control, reduced Volatile Organic Compounds (VOCs) and increased process control and repeatability.
• The resealable pouch reduces waste.
• PROSAT Sterile Polynit Heatseal LE Wipes are validated sterile and suitable for use in aseptic suites and the most critical pharmaceutical cleanrooms.

Features and Benefits:

• Recommended for Grade A/B or ISO Class 3-8 environments - product contact areas
• 100% knitted polyester fabric results in very low levels of particles and fibers
• Laser sealed edges reduces fiber generation from the edge of the wipe
• Guaranteed endotoxin levels of <1EU/device make them ideal for product contact surfaces
• Small number of wipes per resealable pouch to eliminate waste
• Small footprint, hanging pouches available, so ideal for use in isolator and RAB systems
• Presaturated wipe reduces VOC emissions and solvent use
• Resealable pouch preserves cleanliness and solvent saturation levels

Specifications

• Product Type: Pre-saturated Cleanroom Wipe
• Length (Metric): 23 cm
• Width (Metric): 23 cm
• Autoclavable: Not Autoclavable
• Construction: No-run interlock knit
• Dimensions (L x W): 23 x 23 cm (9 x 9 in.)
• Packaging Quantity: 10 Wipes/Pouch, Triple-Bagged
• Saturation Solution: 70% IPA/ 30% WFI, USP grade

• Length (English): 9 in.
• Width (English): 9 in.
• Material: Polyester
• Basis Weight: 140 gsm
• Disposable: Single-use
• For Use With (Application): Most Critical Pharmaceutical Cleanrooms
• Ply: 2-ply
• Sterility: Sterile

Safety and Handling

Product Identifier

• CONTEC PROSAT STERILE POLYNIT HEATSEAL 70/30 IPA & WFI

Signal Word

• Danger

Hazard Category

• Serious eye damage/eye irritation Category 2
• Flammable liquid Category 2
• Specific target organ toxicity Category 3

Hazard Statement

• H225-Highly flammable liquid and vapour.
• H319-Causes serious eye irritation.
• H336-May cause drowsiness or dizziness.

Precautionary Statement

• P210-Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P243-Take precautionary measures against static discharge.
• P261-Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280-Wear protective gloves/protective clothing/eye protection/face protection.
• P303+P361+P353-IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
• P304+P340-IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338-IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312-Call a POISON CENTER/doctor/if you feel unwell.
• P337+P313-If eye irritation persists: Get medical advice/attention.
• P370+P378-In case of fire: Use media other than water to extinguish.
• P403+P233-Store in a well-ventilated place. Keep container tightly closed.

Supplemental information

• MIXTURE LIST-Contains : propan-2-ol