Equipped with a special cap to facilitate easy filling of electrodes. Mettler Toledo™ KCl 3M Electrode Filling Solution is an electrolyte solution that enables optimum performance of pH and ion-selective electrodes. This bridge electrolyte contains no silver ions than can contaminate samples.

Restore proper electrode performance and prolong electrode life using Thermo Scientific™ Orion™ pH Electrode Cleaning and Storage Solutions.

Electrode cables to connect Mettler Toledo InLab sensors to any Mettler Toledo meter.

Enhance the performance and extend the life of your ion selective electrodes.

Electrode cables to connect Mettler Toledo InLab sensors to any Mettler Toledo meter.

Use Thermo Scientific™ Orion™ pH Electrode Filling Solution with pH electrodes and reference electrodes.

Storage and refill solutions for pH electrodes

For ion-selective measurement

Reservoir, Electrode; Fisher Scientific accumet; Stores one electrode in appropriate soaking solution; Oval, polyethylene bottle; Leakproof seal; 1L x 2W x 3.75 in. H

Store and protect your pH electrodes.

Made from the highest quality reagents to provide optimum performance.

Eliminates impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna Instruments™ pH Electrode Cleaning Solution dissolves any mineral deposits or other coatings by soaking up to 20 minutes.

Take more accurate and reproducible ISE measurements with Thermo Scientific™ Orion™ ISE Ionic Strength Adjustors (ISA) and Special Reagents.

For storage of pH electrodes.

Use the probe optical cap replacement with RDO probes.

Electrode cables to connect Mettler Toledo Temperature Probes to any meter.

Protect electrodes from breakage when not in use with the Thermo Scientific™ Orion™ Electrode Storage Sleeve and Base.

Use the Thermo Scientific™ Orion™ Conductivity Resistor Kit to verify the performance of Versa Star and Star A series conductivity meters with 8 pin MiniDIN connectors

Keep your pH probes clean and properly stored for longevity

Use Thermo Scientific™ Orion™ Ion Selective Electrode Accessories for solid state and plastic membrane ion selective electrodes.

Maintain DO probes in optimal working condition with Thermo Scientific™ Orion™ Electrolyte Solution for Polarographic Dissolved Oxygen Probes.

Choose from loose or preassembled membranes for ease of use with Thermo Scientific™ Orion™ Gas-Sensing ISE membranes.

Protect fragile glass membrane against breakage

Convert an electrode with one connector to the required connector of another meter by using the Thermo Scientific™ Orion™ Electrode Adapter Cables.

For Capillary Junction Electrode 13-620-130

For use with Fisherbrand™ accumet™ Benchtop Dissolved Oxygen Meters

Storage and refill solutions for redox electrodes.