Universally compatible on almost all autosamplers. X100 1.1ml Microliter Short Thread Vial ND9, 32 x11.6mm, clear glass, 1st hydrolytic class

Polypropylene caps are chemically inert and suitable for most chromatography applications. X100 9mm Combination Seal: PP Short Thread Cap, blue, centre hole, aluminium liner, 0.06mm

Aluminum (Al): 10 ppb max. Barium (Ba): 10 ppb max. Cadmium (Cd): 10 ppb max. Calcium (Ca): 20 ppb max. CAS: 7732-18-5 Certificate of Analysis: Actual Lot Analysis reported on label; Certificate of Actual Lot Analysis available on request Chemical Name or Material: Water Chromium (Cr): 10 ppb max. Cobalt (Co): 10 ppb max. Copper (Cu): 10 ppb max. Density: 1.000g/cm³ Boiling Point: 100°C Color: Colorless Formula Weight: 18.02 Melting Point: 0°C pH: 7 Physical Form: Liquid Purity Grade: Optima™ LC/MS Filtered Through: 0.03 micron filtered. Halogens: Not Detected Impurities: ≤10ppb (Ionic, Potassium) Iron (Fe): 10 ppb max. LCMS at Negative Mode as Aldicarb: 50 ppb max. LCMS at Positive Mode as Reserpine: 50 ppb max. LCMS Gradient Suitability: ≤2 mAU - PDA (200-400nm) LCMS Negative Mode as Mecoprop: ≤300ppb LCMS Positive Mode as Propazine: ≤50ppb Lead (Pb): 10 ppb max. Magnesium (Mg): 10 ppb max. Manganese (Mn): 10 ppb max. Merck Index: 15, 10237 MDL Number: 11332 Molecular Formula: H₂O Nickel (Ni): 10 ppb max. Packaging: Glass Bottle Physical State: Liquid Potassium (K): 10 ppb max. Protease: Protease free Purity Grade Notes: Formulated for UHPLC-UV Residue after Evaporation: ≤1ppm Silver (Ag): 10 ppb max. Sodium (Na): 20 ppb max. Tin (Sn): 10 ppb max. Vapor Pressure: 17.5mmHg at 20°C Zinc (Zn): 10 ppb max. 500ML Water, Optima(TM) LC/MS grade

Standard vials for GC and HPLC. X100 1.1ml Screw Neck Micro-Vial, 8-425 thread, 32 x 11.6mm, clear glass, conical

Rounded or flat bottom. X100 10ml Headspace-Vial, 46 x 22.5mm, clear glass, DIN Crimp Neck, long neck, flat bottom

Block harmful vapors and protect your solvent from contamination with these valves. Scat™ Air Valves For SafetyCaps feature PTFE filters for contaminants and dust particles. X10 Air valve for SafetyCaps

Universally compatible on almost all autosamplers. X100 1.5ml Short Thread Vial, 32 x 11.6mm, amber,wide,label and filling lines (>>> silanized <<<)

Pre-assembled caps and septa are convenient and minimize contamination from handling. X1000 20mm Aluminium Crimp Cap, plain, centre hole, Silicone white/PTFE beige, 45° shore A, 3.2mm

Standard vials for GC and HPLC. X100 1.1ml Microliter Crimp Neck Vial ND11, 32 x 11.6mm, clear glass, 1st hydrolytic class

Polypropylene caps are chemically inert and suitable for most chromatography applications. X1000 8mm PP Screw Cap, black, centre hole, 8-425thread, Butyl red/PTFE grey, 55° shore A, 1.3mm

Wide opening vials require Inserts with 6mm diameter. X1000 0.1ml Micro-Insert, 29 x 5.7mm, clear glass, with attached Plastic Spring (>>> silanized <<<)

Nearly eliminate septa push-through and improve sealing with vials built with the  innovative Advanced Vial Closure System (AVCS). X100 Vial 9mm wide opening SureStop screw thread(100Pce)

Ideal for storage purposes when used with closed top screw seals. X100 4ml Screw Neck Vial, 45 x 14.7mm, amber glass, 1st hydrolytic class, label and filling lines

Easily accomplish accurate, precise, and reproducible injections with Thermo Scientific™ GC Syringes for Thermo Scientific™ TriPlus™ RSH Autosampler. Fixed needle syringes 10µlFN RSH 57 mm, 26s Gauge

Regulate flow without leaking with these manifolds with luer locks. Cole Parmer™ Polycarbonate Manifolds feature polyurethane stems, HDPE handles and female ports and luer locks. MANIFOLD LUER FEMALE PC 3 SORTIES

X100 20mm open seal with tef/sil, , MA: C4020-32A

Ideal for difficult-to-silylate compounds, the Thermo Scientific™ BSTFA + 1% TMCS Silylation Reagent is derivatizing compounds.

Choose Thermo Scientific™ Hypersil™ ODS C18 HPLC Columns for a general purpose C18 phase to use in a broad range of applications. 125X2.1MM 3µM HYPERSIL ODS

PEEK tubing comes in a variety of internal diameter sizes.  GE Healthcare Lifescience™ PEEK Tubing is an important chromatography accessory. TUBING PEEK 0.15MM I.D., 1/16 INCH O.D., 2M ACCESSory for Ettan(TM) LC

These 13mm vials are 4mL, 15x45mm vials with 13-425 thread finish. They are manufactured from high-quality glass and fit a variety of autosamplers. X250 VIAL CHROMACOL SCREW TOP HIGH RECOVERY 3.5MLcapacity uses 13mm screw caps (pack of 250)

Aluminum (Al): 20 ppb max. Assay Percent Range: ≥99.0 % Calcium (Ca): 50 ppb max. CAS: 64-18-6 CAS: 7732-18-5 Chemical Name or Material: 0.1% Formic Acid in Water (v/v) Copper (Cu): 10 ppb max. Density: 1g/cm³ Boiling Point: 100°C Color: Clear pH: 2 Physical Form: Liquid Purity Grade: Optima™ LC/MS Formic Acid: 0.095 to 0.105% Identification: Pass Test Iron (Fe): 10 ppb max. LCMS Gradient Suitability: Pass Test Lead (Pb): 10 ppb max. Magnesium (Mg): 10 ppb max. Manganese (Mn): 10 ppb max. Merck Index: 15, 4269 MDL Number: 3297 Molecular Formula: CH₂O₂ Name Note: Solvent Blends Nickel (Ni): 10 ppb max. Packaging: Glass Bottle Potassium (K): 20 ppb max. Protease: Protease free Residue after Evaporation: 1ppm max. Silver (Ag): 10 ppb max. Sodium (Na): 50 ppb max. Zinc (Zn): 20 ppb max. 4LT Water, with 0.1% (v/v) Formic acid, Optima LC/MS grade

Prevent septa push through and over- and under-tightening. With AVCS built into these 9mm screw caps you will get an optimal, consistent seal every time. X100 DP 9MM BLUE SOLID TOP T/RR LINED CAP

Thermo Scientific™ HyperSep™ Vacuum Manifolds are designed for use with HyperSep SPE columns and HyperSep-96 well plates. HYPERSEP-96- VACUUM MANIFOLD

Eliminate the requirement for extra fittings with Thermo Scientific™ Uniguard Direct-Connection Guard Cartridge Holders. REPLACEMENT TIP WATERS FORcolumn I.D's 1mm, 2.1mm, 3mm, 4mm, 4.6mm

For HPLC applications only. X1000 1.1ml Microliter Snap Ring Vial, conical, with round glass foot, 32 x 12mm, amber

Have analytes with medium hydrophobicity or need a less hydrophobic phase to obtain optimum retention? These columns provide outstanding sensitivity and excellent peak shape. HYPERSIL GOLD C8 20X2.1MM 1,9µM

Produce ideal conditions for fast, efficient evaporation. Stuart™ Concentrator Evaporators are a fast and convenient way of concentrating multiple samples in a block heater at once. GAZ MANIFOLD

Organize your workstation with convenient barbed fittings kits. Cole-Parmer™ Hose Barb Fitting Kits let you keep a variety of barbed fitting styles on hand. Polypropylene fittings are autoclavable. Include sturdy plastic case to keep fittings organized. X240 MINI BARB FITTINGS

Mid-volume GASTIGHT syringe ideal for dispensing volumes from 100 μL up to 100 mL. 1010 RN 10mL Syr (22/51/2)

For use with Thin Layer Chromatography. CHAMBER NORMAPLAK (WITHOUT LID)