Accommodates a variety of plate sizes RECTANGULAR TLC TANK 'SHORTY'

Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates Kontes TLC Cylindrical Developing Tanks, Chromatog

Fungicrom Separating Chambers (TLC) are to be used with thin layer chropatography. MULTIPLAK CHAMBER W/O LID

Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYL. TANK W. COVER HDPE 30 GAL.

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. RECTANGULAR TANK W COV. PP 15GAL.

For use with Kontes™ rectangular developing tank (K416190-4900) ALUMINUM RACK FOR 14429

Versatility at a lower cost than stainless-steel tanks. TANK HDPE 170L

30 L THERMOS DILUTION WATER TANKmit Temperierschlange, 30 l

NEOBOX 60L TANK ELECTRONIC WASTE

BENCH CAN YELLOW (1L)

4L DIP TANK YELLOW

With a wide-neck opening for safe filling. 200L LDPE CONTAINER

Versatility at a lower cost than stainless-steel tanks. CYL. TANK W. SPIGOT HDPE 10 GAL

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. TANK,CYLINDRICAL,POLYPROPYLENE WITH COVER 560 X920MM DIAMETER X HT 208 LITRE

19L DIP TANK YELLOW

Kartell™ HDPE Industrial Tank is useful in everyday laboratory practice and features a comfortable handle with a secure seal-cap following DIN recommendations. X24 industrial tanks HDPE 10 L GL51

Knob Lid for use with Fungicrom Separating Chambers (TLC). LID FOR TLC TANK 10X10CM

Develop multiple TLC plates simultaneously. TLC Simultaneous Developing Chambers  come with a choice of room for either 2 or 5 plates. TLC-Separation-Chamber for 2 simultaneous separations, 10 x 10 cm plates

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. ASPIRATOR POLYPROPYLENE LOWBOYS CAPACITY 8 LITRES(2324-0008)

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. TANK ZYLINDRISCH, 38 L HDPE M. DECKEL/HAHN,GRAD.

Designed to rationalize laboratory and small production line organization. Kartell™ Tank with Spigot gives the opportunity to optomize water, aqueous solutions and solvents availablity in a reduced space. X4 tanks HDPE with spigot 20 L

Molded glass tanks for development of any size TLC plate up to 20 × 20cm Developing Tank with Latch Lid two 20 x 20cm or

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. BIOTECH CLOSED DOME TANK PPCO 100GSchraubverschluss

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. 28L TANK

X1 TLC Micro Set A

Constructed of high density polyethylene, making it good for packaging and transporting liquids in the food industry. Kartell™ Spigot for Tank facilitates easy use by allowing the tank to be in a position to stand. X2 tap for tanks 1770 and 1771

Cylindrical glass tanks for the development of 1 x 3 in. to 10 x 20cm plates. TLC tank Kimble cylindrical glass for 5 x 20cmplates withstandard glass lid (1)

TANK TLC DEVELOPING 10X10

Nonslip Lid for TLC Developing Tanks TLC TANK NS LID

Standard Lid for TLC Developing Tank TLC DEV TANK LID