Ismatec™ MCP Process Drive

Use this drive for dosing and filling applications. Ismatec™ MCP Process Drives feature bayonet coupling system for 20 interchangeable pump-heads and a closed-loop control for pressure independent speed.

Brand:  Ismatec™ ISM915A

Product Code. 11993814

Description

• Powerful, programmable, IP65-rated dispensing pump
• Dust-tight and waterproof against water jets from all directions
• No internal corrosion thanks to sealed stainless steel housing
• Process suitable with batch programming capabilities
• Microprocessor controlled
• Memory saves up to 4 sets of operating parameters
• Flow rate and volume can be calibrated
• Remote controllable via PC (RS232)
• Pump-heads with 1 to max. 24 channels
• Also accepts ceramic piston pump-heads

Programming

• 4 individual command sequences programmed in a PC can be stored in  the pump
• User can run the programs using the pump as a stand-alone unit

Operating Modes

• Pumping by drive speed (rpm)
• Pumping by flow rate (mL/min.)
• Factory-set flow rates for all available tube sizes
• Dispensing by volume (ml)
• Dispensing by time (0.1 sec. up to 999 hours)
• Dispensing by volume within a pre-set time
• Interval dispensing by volume with a pause
• Interval dispensing by time with a pause
• Setting the number of dispensing cycles
• Pause time setting (from 0.1 sec. up to 999 hours)
• Roller back-steps for drip-free dispensing
• Reversible rotation direction

Specifications

• Flow Rate: 0.001 to 3700 mL/min.
• IP Rating: IP 65
• Model: MCP Process Drive
• Overall Depth (Metric): 220 mm
• Overall Width (Metric): 155 mm
• Voltage: 100 to 230 VAC

• Frequency: 50/60 Hz
• Includes: Progedit software (free download), Driver for “LabView” software (free download), Foot switch
• Motor Type: DC Motor
• Overall Height (Metric): 260 mm
• Wattage: 100 w
• Speed: 1 to 240 rpm