Achieve smooth and uniform cutting of stainless steel tubing with this cutting wheel type tubing cutter. Vici Valco Instruments™ Stainless Steel Tubing Cutter is ideal for cutting 1/16 in. and 1/8 in. SS tubing. HPLC TUBING CUTTER

Used when using low pressure columns and/or when the pH electrode is mounted in the pH flow cell.  GE Healthcare FR-902 FFKM / PEEK / Stainless Steel Flow Restrictor is pre-set to 0.2 MPa. FLOW RESTRICTOR FR902

Quickly locate and identify gas leaks in your GC instrument with the Thermo Scientific™ GLD Pro Gas Leak Detector. LEAK DETECTOR GLD PRO TO AIDlocating and identifying gas leaks

Use Thermo Scientific™ General Gas Chromatography Tubing and Tools to maintain and optimize your GC instrument. DRILL BIT 0.7MM

Produces square, smooth cuts in 1.6mm (1/16-inch) tubing. Tubing cutter Restek for 1/16 inch tubing

Find the copper and stainless steel tubing in a variety of sizes for plumbing your gas chromatography (GC) system. COPPER TUBING 1/4' OD 0.19' ID 50FT L

Maintain the performance of your GC instrument with Thermo Scientific GC Tool Kits. GC TOOL KIT FOR GENERAL GCapplications

CLEAN-CUT TUBING CUTTER

SPANNER WRENCH HISCALE 50, 1/Cs, MA: 28-9647-78

Switch your GC column in GC-MS without having to vent.

Thermo Scientific™ GC Tool Kit for Agilent Instruments includes common consumable supplies and tools. GC TOOKKIT

CAPILLARY TUBE CUTTER

Ceramic Capillary Tubing Cutter. Pack of 3 wafers. X3 CAPILLARY CERAMIC TUBE CUTTER

Probe adaptor and carrying case for use with the Thermo Scientific™ GLD Pro Gas Leak Detector. GFM Pro Calibration

Use these thermometers to measure temperature in dry block heaters of Thermo Scientific™ Reacti-Therm™ Heating and Stirring module.

Use the Thermo Scientific™ Rheodyne™ Injection Port Needle Cleaner to maintain performance of your Rheodyne Sample Injectors for HPLC. INJECTION PORT NEEDLE CLEANERRheodyne foruse with Rheodyne injectors

Add a GC system to your lab bench with the Thermo Scientific™ GC Installation Kit. The required tubing and fittings are conveniently supplied in this kit. GC INSTALLATION KIT

PACKING EQUIPMENT 5/50 ACCESSORY FOR TRICORNempty high-performance columns

Includes twelve hex keys (Allen wrenches). Hex key set Restek 12 piece ball-point with plasti

Produce clean, 90° cuts of 1/16 in. and 1/8 in. stainless-steel tubing used in your HPLC system with Thermo Scientific™ Terry Tool Tubing Cutters. TUBING CUTTER TERRY TOOL STAINLEss steel 90' cuts of stainless steel tubing 1/8

Switch your GC without the need to vent using the Thermo Scientific™ 3-Port SilFlow™ Device.

Ideal for cutting 1/16 in. tubing Tubing cutting pliers Restek for 1/16 inch tubing

Make column changeovers quick and easy. Use this GC-MS interface system to switch capillary columns without the need to vent your mass spectrometer (MS).

SHORT COLUMN HOLDER

FILTER TOOLColumns

X4 Benchmark endpiece Omnifit(R) microbore fixed

Conveniently provide the tools necessary for installing and maintaining capillary columns MLE capillary tool kit Restek for Varian GCs

For Agilent 5890, 6850 and 6890 GCs. Injector wrench Restek for Agilent 5890/6890/6850

Use one end to remove your old seal, then simply slip your new seal on the other end and push it flush into position Tool Restek HPLC piston seal insertion

Produce flat, 90°, burr-free ends of polymer tubing for HPLC applications using Thermo Scientific™ Polymer Tubing Cutter.